MAIN CONTENT
Laboratory microwave reflection tests across 2 to 18 gigahertz
In findings published online October 26, 2026 in the peer-reviewed Chinese Journal of Inorganic Materials, senior engineer Zheng Xuan — also affiliated with Aero Engine Corporation of China's Shenyang Engine Research Institute — and professor Qing Yuchang of Northwestern Polytechnical University sprayed a conventional composite of carbonyl iron powder and silicone resin onto titanium alloy plates to create a 1mm-thick coating.
The researchers introduced scratches, surface wear, and complete coating detachment across varying areas, depths, and locations and measured microwave reflections from 2 to 18 gigahertz; in one test, removing 10 percent of the coating raised minimum reflection from minus 12.73 decibels to minus 9.78 decibels — a 2.95 decibel shift representing an approximately 1.97-fold increase in reflected power.
"Structural integrity and performance reliability are critical to maintaining low detectability throughout a material's service life." Zheng Xuan and Qing Yuchang
How damage type, depth, and location affect stealth performance
Experimental measurements showed that microwave absorption degradation varies markedly depending on the form, depth, and position of surface damage:
Scratches had relatively minor effects on microwave reflections even across 50 percent of a sample's surface because most absorbing material remained intact.
Mild wear up to 20 percent surface area and 0.4mm depth caused limited degradation, whereas wear covering 50 percent of the surface and penetrating 0.6mm — especially centrally — pushed minimum reflection to minus 7.37 decibels by disrupting thickness-dependent electromagnetic matching.
Complete detachment exposing the conductive titanium alloy substrate proved most severe: central detachment of 10 percent raised minimum reflection to minus 9.12 decibels and 50 percent detachment raised it to minus 2.91 decibels, with strip-shaped and central detachment causing far greater impact than edge damage due to strong metallic reflection plus edge diffraction and scattering.
















